diff --git a/Readme.txt b/Readme.txt
index 5f48d52..bd5cedb 100644
--- a/Readme.txt
+++ b/Readme.txt
@@ -1,4 +1,4 @@
-$Id: Readme.txt,v 1.1 2006/09/26 18:18:27 rschaten Exp $
+$Id: Readme.txt,v 1.2 2006/10/01 16:28:01 rschaten Exp $
 
 For full documentation and examples, take a look at htmldoc/index.html.
 
@@ -73,8 +73,8 @@ avrdude with a parallel connection to an stk200-compatible programmer.
 If working with a brand-new controller, you may have to set the fuse-bits to
 use the external crystal:
 
- avrdude -p atmega8 -P /dev/parport0 -c sp12 -U hfuse:w:0xC9:m \
-                                             -U lfuse:w:0x9F:m
+ avrdude -p atmega8 -P /dev/parport0 -c stk200 -U hfuse:w:0xC9:m \
+                                               -U lfuse:w:0x9F:m
 
 Afterwards, you can compile and flash to the device:
 
diff --git a/common/usbledfader.h b/common/usbledfader.h
index 5095cf4..b519f3d 100644
--- a/common/usbledfader.h
+++ b/common/usbledfader.h
@@ -5,7 +5,7 @@
  * \file usbledfader.h
  * \brief Global definitions and datatypes, used by the firmware and the commandline-client. Also contains the main doxygen-documentation.
  * \author Ronald Schaten & Thomas Stegemann
- * \version $Id: usbledfader.h,v 1.1 2006/09/26 18:18:27 rschaten Exp $
+ * \version $Id: usbledfader.h,v 1.2 2006/10/01 16:28:01 rschaten Exp $
  *
  * License: See documentation.
  */
@@ -19,7 +19,7 @@
  * it to display the online-status of my internet-connection, the
  * recording-status of my videorecorder, and warnings if the available
  * disc-space is low. You can imagine an endless number of applications for
- * this.  
+ * this.
  *
  * The LEDs are controlled with pulse width modulation (PWM). That way, they
  * are not only on or off, it is possible to control the brightness. Included
@@ -81,7 +81,7 @@
  * use the external crystal:
  *
  * \code
- * avrdude -p atmega8 -P /dev/parport0 -c sp12 -U hfuse:w:0xC9:m -U lfuse:w:0x9F:m
+ * avrdude -p atmega8 -P /dev/parport0 -c stk200 -U hfuse:w:0xC9:m -U lfuse:w:0x9F:m
  * \endcode
  *
  * Afterwards, you can compile and flash to the device: