2.3 KiB
IRlicht
A 4-channel (RGBW) controller for LED-lamps, based on Arduino and controlled via infrared by a universal remote.
Copyright 2014 Ronald Schaten http://www.schatenseite.de
Circuit
You can see how to connect your Arduino in the enclosed Fritzing files and their rendered breadboard schematics. Basically, it's just the IR receiver diode, and one MOSFET per output channel. The Arduino can live quite well with the 12V on it's Vin, so no more voltage regulation is necessary.
The receiver doesn't necessarily have to be an TSOP31238. After frying two of those, I dissected an old DVD player and desoldered the enclosed IR receiver diode from that. Worked like a charm. :-)
Software
After installing Ken Shirriff's IR receiver library in your Arduino environment, everything you need is the enclosed sketch (irlicht.ino). Depending on the setup of your hardware, you may have to adjust the pins your receiver and your MOSFETs are connected to.
Use the examples that are shipped with the IR remote library to find the codes that your remote is emitting, and set up the defines according to this.
With the initial brightness levels given in the sketch, you can select which mode and colors should be active when the device is switched on.
Usage
If your remote is set up like mine, you get the following functions:
Some keys for basic color selection:
- 1 -- red
- 2 -- green
- 3 -- blue
- 5 -- white
- 7 -- yellow (red and green)
- 8 -- cyan (green and blue)
- 9 -- magenta (blue and red)
On the first press, the channel is turned on to 1/5 of maximum. Repeating the key enhances the brightness, after five levels the channel is turned off again.
- 4 -- all channels on
- 6 -- all channels off
This turns the whole setup on or off with one single press of a button.
-
Flash -- Hard cycle through all colors (except white).
-
Fade -- Soft cycle through all colors (except white).
-
Strobe -- Turn the currently selected color on and off.
-
Soft -- Fade the current color from dark to a certain level and back.
-
Dim -- Decrease the maximum brightness of the lamp.
-
Bright -- Increase the maximum brightness.
-
AllLightsOn -- Misleading name: this speeds up the current animation.
-
AllLightsOff -- Also misleading, although consistent: slows down the animation.
Comments
Feel free to drop me a line at ronald@schatenseite.de.